pH and EC Transmitter with Isolated Output – 0 – 1 V

Direct Connection

Direct connection of the probes to the transmitter assures a positive electrical connection with no signal loss. This transmitter is ideal for remote process control applications.

Output Signals

Four models are available, transmitting a 0-1 V, 0-4 V or 4-20 mA signal. The output signals are proportional to the input signals but independent of changes in load or cable capacitance.

Automatic Temperature Compensation

Compensation for the effects of temperature for EC measurements is performed by the transmitters’ Automatic Temperature Compensation circuitry.

Connectivity

The transmitter can be connected to any pH or conductivity controller, recorder, PC or any data monitoring device that accepts 0 to 1 V, 0 to 4 V or 4 to 20 mA input.

Simple Design

Probes connectors, power supply, contacts, and calibration trimmers are easy to reach directly on the front panel

Versatile Use

For in-line applications, the recommended pH electrode is the HI1001 while the conductivity probe is the HI3001. HI1001 is a combined double junction pH electrode with BNC and 3m cable; HI3001 is a 4-ring conductivity probe with platinum sensors and an int

SKU	HI98143-web
Name	pH and EC Transmitter with Isolated Output
pH Range	0 to 14
pH Accuracy	±0.5% f.s.
pH Calibration	Manual, 2 point, through trimmers
EC Range	0 to 10 mS/cm
EC Accuracy	±2% f.s.
EC Calibration	0 (offset) and 5 mS/cm (slope) trimmers
EC/TDS Temperature Compensation	Automatic from 0 to 60 ºC
Temperature Correction Coefficient	ß=2%/ ºC
Cell Type	4-ring EC probes
EC/TDS Probe	Four (ring) pole probe with built in NTC sensor
Analog Output	HI98143-01 0-1 V HI98143-04 0-4 V HI98143-20 4-20 mA (passive) HI98143-22 4-20 mA (active)
Power Supply	12-24 Vdc
Environment	0 to 50 °C (32 to 122 °F); max 95% RH non-condensing
IP Rating	IP54
Dimensions	160 x 105 x 31mm (6.3 x 4.1 x 1.2”)
Weight	280 g (9.9 oz.)

pH and EC Transmitter with Isolated Output