Holmium Oxide Glass Filter for Spectrophotometers – HI801-11

Holmium is a rare earth element that is silvery white and malleable. Holmium reacts with oxygen to form holmium oxide. Glasses that contain holmium oxide or holmium oxide solution are useful in the calibration of spectrophotometers due to their sharp absorption peaks in the visible spectrum. The National Institute of Technology (N.I.S.T.), formerly National Bureau of Standards (N.B.S.) uses a holmium oxide solution sealed into silica cuvettes as the standard reference material (SRM 2034) for traceability. The holmium oxide solution is prepared with holmium oxide dissolved in perchloric acid. This solution has many well-defined absorption bands. The SRM2034 was found to be stable for up to thirty years*

The HI801-11 is traceable to SRM2034 and is supplied with certificate of that identifies the peak absorbance values of the filter within 0.1 nm of uncertainty. The HI801-11 holmium oxide filter is used with the wavelength check mode found in the HI801 iris spectrophotometer. The filter is placed into the meter and the wavelength check mode is then used to verify the wavelength positioning. Once the check is complete the meter will display the wavelength peaks and they are compared to the values found on the certificate. The values should be within ±1.5 nm of the certified value.

* NIST Special Publication 260-192

FEATURES/BENEFITS:

Holmium Oxide Filter

Supplied with Certificate of Analysis

traceable to SRM2034
All values are certified and have an uncertainty of less than 0.1 nm
Packaged in light tight plastic cuvette holder

SKU	HI801-01
Name	iris Visible Spectrophotometer – HI801
pH Range	6.5 to 8.5 pH
pH Resolution	0.1 pH
pH Accuracy	±0.1 pH
pH Method	Adaptation of the Phenol Red method
Dissolved Oxygen Range	0.0 to 10.0 mg/L (as O2 )
Dissolved Oxygen Resolution	0.1 mg/L
Dissolved Oxygen Accuracy	±0.4 mg/L ±3% of reading
Dissolved Oxygen Measurement Method	Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18^th edition, Azide modified Winkler method
Absorbance Range	0.000 to 3.000 Abs
Absorbance Resolution	0.001 Abs
Absorbance Accuracy	5 mAbs at 0.000-0.500 Abs 1% at 0.500-3.000 Abs
Alkalinity Range	0 to 500 mg/L (as CaCO3 )
Alkalinity Resolution	1 mg/L
Alkalinity Accuracy	±5 mg/L ±5% of reading
Alkalinity Method	Colorimetric Method
Seawater Alkalinity Range	0 to 300 mg/L (as CaCO3 )
Seawater Alkalinity Resolution	1 mg/L
Seawater Alkalinity Accuracy	±5 mg/L ±5% of reading
Seawater Alkalinity Method	Colorimetric Method
Aluminum Range	0.00 to 1.00 mg/L (as Al3+)
Aluminum Resolution	0.01 mg/L
Aluminum Accuracy	±0.04 mg/L ±4% of reading
Aluminum Method	Adaptation of the aluminon method.
Ammonia Range	Low Range:0.00 to 3.00 mg/L (as NH3 -N) Medium Range: 0.00 to10.00 mg/L (as NH3 -N) High Range: 0.0 to 100.0 mg/L (as NH3 -N)
Ammonia Resolution	Low and Medium Range: 0.01 mg/L High Range: 0.1 mg/L
Ammonia Accuracy	Low Range: ±0.04 mg/L ±4% of reading Medium Range: ±0.05 mg/L ±5% of reading High range: ±0.5 mg/L ±5% of reading
Ammonia Method	Adaptation of the ASTM Manual of Water and Environmental Technology, D1426 Nessler method.
Anionic Surfactants Range	0.00 to 3.50 mg/L (as SDBS)
Anionic Surfactants Resolution	0.01 mg/L
Anionic Surfactants Accuracy	±0.04 mg/L ±3% of reading
Anionic Surfactants Method	Adaptation of the USEPA method 425.1 and Standard Methods for the Examination of Water and Wastewater, 20^th edition, 5540C, Anionic Surfactants as MBAS
Bromine Range	0.00 to 8.00 mg/L (as Br2 )
Bromine Resolution	0.01 mg/L
Bromine Accuracy	±0.08 mg/L ±3% of reading
Bromine Method	Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18^th edition, DPD method
Calcium Range	0 to 400 mg/L (as Ca2+)
Calcium Resolution	1 mg/L
Calcium Accuracy	±10 mg/L ±5% of reading
Calcium Method	Adaptation of the Oxalate method
Carbon Dioxide Range	0.00 to 2.00 mg/L (as ClO2 )
Carbon Dioxide Resolution	0.01 mg/L
Carbon Dioxide Accuracy	±0.10 mg/L ±5% of reading
Carbon Dioxide Method	Adaptation of the Chlorophenol Red method
Chemical Oxygen Demand Range	Low Range: 0 to 150 mg/L (as O2 ) Medium Range: 0 to 1500 mg/L (as O2 ) High Range: 0 to 15000 mg/L (as O2 )
Chemical Oxygen Demand Resolution	1 mg/L
Chemical Oxygen Demand Accuracy	Low Range: ±5 mg/L or ±4% of reading Medium Range: ±15 mg/L or ±4% of reading High Range: ±150 mg/L or ±2% of reading
Chemical Oxygen Demand Method	Adaptation of the USEPA 410.4
Chloride Range	0.0 to 20.0 mg/L (as Cl)
Chloride Resolution	0.1 mg/L
Chloride Accuracy	±0.5 mg/L ±6% of reading
Chloride Method	Adaptation of the mercury(II) thiocyanate method
Chlorine Dioxide Range	0.00 to 2.00 mg/L (as ClO2 )
Chlorine Dioxide Resolution	0.01 mg/L
Chlorine Dioxide Accuracy	±0.10 mg/L ±5% of reading
Chlorine Dioxide Method	Adaptation of the Chlorophenol Red method
Free Chlorine Range	Ultra Low Range : 0.000 to 0.500 mg/L (as Cl2 ) Low Range : 0.00 to 5.00 mg/L (as Cl2) High Range : 0.00 to 10.00 mg/L (as Cl2)
Free Chlorine Resolution	Ultra Low Range : 0.001 mg/ Low Range : 0.01 mg/L High Range : 0.01 mg/L
Free Chlorine Accuracy	Ultra Low Range : ±0.020 mg/L ±3% of reading Low Range : ±0.03 mg/L ±3% of reading High Range : ±0.03 mg/L ±3% of reading
Total Chlorine Range	Ultra Low Range : 0.000 to 0.500 mg/L (as Cl2 ) Low Range : 0.00 to 5.00 mg/L (as Cl2) High Range : 0.00 to 10.00 mg/L (as Cl2) Ultra High Range : 0 to 500 mg/L (as Cl2 )
Total Chlorine Resolution	Ultra Low Range : 0.001 mg/L Low Range : 0.01 mg/L High Range : 0.01 mg/L Ultra High Range : 1 mg/L
Total Chlorine Accuracy	Ultra Low Range : ±0.020 mg/L ±3% of reading Low Range : ±0.03 mg/L ±3% of reading High Range : ±0.03 mg/L ±3% of reading Ultra High Range : ±3 mg/L ±3% of reading
Chromium, Hexavalent Range	Low Range : 0 to 300 µg/L (as Cr(VI)) High Range : 0 to 1000 µg/L (as Cr(VI))
Chromium, Hexavalent Resolution	Low Range : 1 µg/L High Range : 1 µg/L
Chromium, Hexavalent Accuracy	Low Range : ±10 µg/L ±4% of reading High Range : ±5 µg/L ±4% of reading at 25 °C
Chromium, Hexavalent Method	Adaptation of the ASTM Manual of Water and Environmental Technology, D1687, Diphenylcarbohydrazide method
Color, Water Range	0 to 500 PCU (Platinum Cobalt Units)
Color, Water Resolution	1 PCU
Color, Water Accuracy	±10 PCU ±5% of reading
Color, Water Method	Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18^th edition, Colorimetric Platinum Cobalt method
Color, Maple Syrup Range	0.00 to 100.00 %T
Color, Maple Syrup Resolution	0.01 %T
Color, Maple Syrup Accuracy	±3% of reading
Color, Maple Syrup Method	Direct measure
Copper Range	Low Range : 0.000 to 1.500 mg/L (as Cu) High Range : 0.00 to 5.00 mg/L (as Cu)
Copper Resolution	Low Range :0.001 mg/L High Range : 0.01 mg/L
Copper Accuracy	Low Range : ±0.010 mg/L ±5% of reading High Range : ±0.02 mg/L ±4% of reading
Copper Method	Adaptation of the EPA method
Cyanide Range	0.000 to 0.200 mg/L (as CN-)
Cyanide Resolution	0.001 mg/L
Cyanide Accuracy	±0.005 mg/L ±3% of reading
Cyanide Method	Pyridine-Pyrazalone
Cyanuric Acid Range	0 to 100 mg/L (as CYA)
Cyanuric Acid Resolution	1 mg/L
Cyanuric Acid Accuracy	±1 mg/L ±15% of reading
Cyanuric Acid Method	Adaptation of the turbidimetric method
Fluoride Range	Low Range : 0.00 to 2.00 mg/L (as F) High Range : 0.0 to 20.0 mg/L (as F)
Fluoride Resolution	Low Range : 0.01 mg/L High Range : 0.1 mg/L
Fluoride Accuracy	Low Range : ±0.03 mg/L ±3% of reading High Range : ±0.5 mg/L ±3% of reading
Fluoride Method	Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18^th edition, SPADNS method
Hardness, Total Range	Low Range : 0 to 250 mg/L (as CaCO3 ) Medium Range : 200 to 500 mg/L (as CaCO3 ) High Range : 400 to 750 mg/L (as CaCO3 )
Hardness, Total Resolution	1 mg/L
Hardness, Total Accuracy	Low Range : ±5 mg/L ±4% of reading Medium Range : ±7 mg/L ±3% of reading High Range : ±10 mg/L ±2% of reading
Hardness, Total Method	Adaptation of the EPA recommended method 130.1
Hardness, Calcium Range	0.00 to 2.70 mg/L (as CaCO3 )
Hardness, Calcium Resolution	0.01 mg/L
Hardness, Calcium Accuracy	±0.11 mg/L ±5% of reading
Hardness, Calcium Method	Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18^th edition, Calmagite method
Hardness, Magnesium Range	0.00 to 2.00 mg/L (CaCO3 )
Hardness, Magnesium Resolution	0.01 mg/L
Hardness, Magnesium Accuracy	±0.11 mg/L ±5% of reading
Hardness, Magnesium Method	Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18^th edition, EDTA Colorimetric method
Hydrazine Range	0 to 400 µg/L (as N2H4 )
Hydrazine Resolution	1 µg/L
Hydrazine Accuracy	±4% of full scale reading
Hydrazine Method	Adaptation of the ASTM Manual of Water and Environmental Technology, method D1385, p-Dimethylaminobenzaldehyde method
Iodine Range	0.0 to 12.5 mg/L (as I2 )
Iodine Resolution	0.1 mg/L
Iodine Accuracy	±0.1 mg/L ±5% of reading
Iodine Method	Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18^th edition, DPD method
Iron Range	Low Range : 0.000 to 1.600 mg/L (as Fe) High Range : 0.00 to 5.00 mg/L (as Fe)
Iron Resolution	Low Range : 0.001 mg/L High Range : 0.01 mg/L
Iron Accuracy	Low Range : ±0.010 mg/L ±8% of reading High Range : ±0.04 mg/L ±2% of reading
Iron Method	Low Range : Adaptation of the TPTZ Method High Range : Adaptation of the EPA Phenanthroline method 315B, for natural and treated waters
Magnesium Range	0 to 150 mg/L (as Mg2+)
Magnesium Resolution	1 mg/L
Magnesium Accuracy	±5 mg/L ±3% of reading
Magnesium Method	Adaptation of the Calmagite method
Manganese Range	Low Range : 0 to 300 µg/L (as Mn) High Range : 0.0 to 20.0 mg/L (as Mn)
Manganese Resolution	Low Range : 1 µg/L High Range : 0.1 mg/L
Manganese Accuracy	Low Range : ±10 µg/L ±3% of reading High Range : ±0.2 mg/L ±3% of reading
Manganese Method	Low Range : Adaptation of the PAN Method High Range : Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18^th edition, Periodate method
Molybdenum Range	0.0 to 40.0 mg/L (as Mo6+)
Molybdenum Resolution	0.1 mg/L
Molybdenum Accuracy	±0.3 mg/L ±5% of reading
Molybdenum Method	Adaptation of the mercaptoacetic acid method
Nickel Range	Low Range : 0.000 to 1.000 mg/L (as Ni) High Range : 0.00 to 7.00 g/L (as Ni)
Nickel Resolution	Low Range : 0.001 mg/L High Range : 0.01 g/L
Nickel Accuracy	Low Range : ±0.010 mg/L ±7% of reading High Range : ±0.07g/L ±4% of reading
Nickel Method	Low Range : Adaptation of the PAN method High Range : Adaptation of the photometric method
Nitrate Range	0.0 to 30.0 mg/L (as NO3 – N) Chromotropic Acid : 0.0 to 30.0 mg/L (as N03–N)
Nitrate Resolution	0.1 mg/L
Nitrate Accuracy	±0.5 mg/L ±10% of reading Chromotropic Acid : ±1.0 mg/L or ±3% of reading
Nitrate Method	Adaptation of the cadmium reduction method Chromotropic Acid : Chromotropic acid method
Nitrite Range	Marine Ultra Low Range : 0 to 200 µg/L (as N02 -N) Low Range : 0 to 600 µg/L (as NO2 -N) High Range : 0 to 150 mg/L (as NO2-)
Nitrite Resolution	Marine Ultra Low Range : 1 µg/L Low Range : 1 µg/L High Range : 1 mg/L
Nitrite Accuracy	Marine Ultra Low Range : ±10 µg/L ±4% of reading Low Range : ±20 µg/L ±4% of reading High Range : ±4 mg/L ±4% of reading
Nitrite Method	Marine Ultra Low Range : Adaptation of the EPA Diazotization method 354.1 Low Range : Adaptation of the EPA Diazotization method 354.1 High Range : Adaptation of the Ferrous Sulfate method
Nitrogen, Total Range	Low Range : 0.0 to 25.0 mg/L (as N) High Range : 10 to 150 mg/L (as N)
Nitrogen, Total Resolution	Low Range : 0.1 mg/L High Range : 1 mg/L
Nitrogen, Total Accuracy	Low Range : ±1.0 mg/L or ±5% of reading High Range : ±3 mg/L or ±4% of reading
Nitrogen, Total Method	Chromotropic acid method
Oxygen, Scavenger Range	Carbohydrazide : 0.00 to 1.50 mg/L (as Carbohydrazide) Diethylhydroxylamine)(DEHA) : 0 to 1000 µg/L (as DEHA) Hydroquinone : 0.00 to 2.50 mg/L (as Hydroquinone) Iso-ascorbic Acid :0.00 to 4.50 mg/L (as Iso-ascorbic acid)
Oxygen, Scavenger Resolution	Carbohydrazide : 0.01 mg/L Diethylhydroxylamine)(DEHA) : 1 µg/L Hydroquinone : 0.01 mg/L Iso-ascorbic Acid : 0.01 mg/L
Oxygen, Scavenger Accuracy	Carbohydrazide : ±0.02 mg/L ±3% of reading Diethylhydroxylamine)(DEHA) : ±5 µg/L ±5% of reading Hydroquinone : ±0.04 mg/L ±3% of reading Iso-ascorbic Acid : ±0.03 mg/L ±3 % of reading
Oxygen, Scavenger Method	Adaptation of the iron reduction method
Ozone Range	0.00 to 2.00 mg/L (as O3 )
Ozone Resolution	0.01 mg/L
Ozone Accuracy	±0.02 mg/L ±3% of reading
Ozone Method	Colorimetric DPD Method
Phosphate Range	Low Range : 0.00 to 2.50 mg/L (as PO4 3-) High Range : 0.0 to 30.0 mg/L (as PO4 3-)
Phosphate Resolution	Low Range : 0.01 mg/L High Range : 0.1 mg/L
Phosphate Accuracy	Low Range : ±0.04 mg/L ±4% of reading High Range : ±1.0 mg/L ±4% of reading
Phosphate Method	Low Range : Adaptation of the Ascorbic Acid method High Range : Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18^th edition, Amino Acid method
Phosphorous, Acid Hydrolyzable Range	0.00 to 1.60 mg/L (as P)
Phosphorous, Acid Hydrolyzable Resolution	0.01 mg/L
Phosphorous, Acid Hydrolyzable Accuracy	±0.05 mg/L or ±5% of reading
Phosphorous, Acid Hydrolyzable Method	Adaptation of the EPA method 365.2 and Standard Methods for the Examination of Water and Wastewater, 20^th edition, 4500-P E, ascorbic acid method.
Phosphorous, Reactive Range	Low Range : 0.00 to 1.60 mg/L (as P) High Range : 0.0 to 32.6 mg/L (as P)
Phosphorous, Reactive Resolution	Low Range : 0.01 mg/L High Range : 0.1 mg/L
Phosphorous, Reactive Accuracy	Low Range : ±0.05 mg/L or ±4% of reading High Range : ±0.5 mg/L or ±4% of reading
Phosphorous, Reactive Method	Adaptation of the EPA method 365.2 and Standard Methods for the Examination of Water and Wastewater, 20^th edition, 4500-P E, ascorbic acid method.
Phosphorous, Total Range	Low Range : 0.00 to 1.15 mg/L (as P) High Range : 0.0 to 32.6 mg/L (as P)
Phosphorous, Total Accuracy	Low Range : 0.01 mg/L High Range : 0.1 mg/L
Phosphorous, Total Resolution	Low Range : ±0.05 mg/L or ±6% of reading High Range : ±0.5 mg/L or ±5% of reading
Phosphorous, Total Method	Low Range : Adaptation of the EPA method 365.2 and Standard Methods for the Examination of Water and Wastewater, 20^th edition, 4500-P E, ascorbic acid method. High Range : Adaptation of the Standard Methods for the Examination of Water and Wastewate
Potassium Range	Low Range : 0.0 to 20.0 mg/L (as K) Medium Range : 10 to 100 mg/L (as K) High Range : 20 to 200 mg/L (as K)
Potassium Resolution	Low Range : 0.1 mg/L Medium Range : 1 mg/L High Range : 1 mg/L
Potassium Accuracy	Low Range : ±2 mg/L ±7% of reading Medium Range : ±10 mg/L ±7% of reading High Range : ±20 mg/L ±7% of reading
Potassium Method	Adaptation of the Turbidimetric Tetraphenylborate method
Silica Range	Low Range : 0.00 to 2.00 mg/L (as SiO2 ) High Range : 0 to 200 mg/L (as SiO2 )
Silica Resolution	Low Range : 0.01 mg/L High Range : 1 mg/L
Silica Accuracy	Low Range : ±0.03 mg/L ±3% of reading High Range : ±1 mg/L ±5% of reading
Silica Method	Low Range : Adaptation of the ASTM Manual of Water and Environmental Technology, D859, Heteropoly Molybdenum Blue method High Range : Adaptation of the USEPA Method 370.1 for drinking, surface and saline waters, domestic and industrial wastes and
Silver Range	0.000 to 1.000 mg/L (as Ag)
Silver Resolution	0.001 mg/L
Silver Accuracy	±0.020 mg/L ±5% of reading
Silver Method	Adaptation of the PAN method
Sulfate Range	0 to 150 mg/L (as SO42-)
Sulfate Resolution	1 mg/L
Sulfate Accuracy	±5 mg/L ±3% of reading
Sulfate Method	Sulfate is precipitated with barium chloride crystals
Zinc Range	0.00 to 3.00 mg/L (as Zn)
Zinc Resolution	0.01 mg/L
Zinc Accuracy	±0.03 mg/L ±3% of reading
Zinc Method	Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18^th edition, Zincon method
Wavelength Range	340 to 900 nm
Wavelength Resolution	1 nm
Wavelength Accuracy	±1.5 nm
Measurement Modes	Transmittance (% T), absorbance (abs), concentration with choice of units (ppm, mg/L, ppt, ºf, ºe, ppb, meq/L, μg/L, PCU, Pfund, pH, dKH, ºdH, meq/kg or no measurement unit)
Wavelength Selection	automatic, based on the selected method (editable for user methods only)
Optical System	split beam sample and reference light detectors
Wavelength Calibration	internal, automatic at power-on, visual feedback
Data Points Stored	up to 9999 measured values
Export Capability	.csv file format, .pdf file format
Connectivity	(1) USB – A (mass storage host); (1) USB – B (mass storage device)
Power Supply	15 VDC power adapter; 10.8 VDC Li-Ion rechargeable battery
Battery Type/Life	3000 measurements or 8 hours
Environment	0 to 50 °C (32 to 122 °F); 0 to 95% RH
Weight	3 kg (6.6 lbs)
Dimensions	155 x 205 x 322 mm (6.1 x 8.0 x 12.6*rdquo;)

HI801 is supplied with 22 mm sample cuvette and cap (4), 10 mm square, 13 mm round and 16 mm round cuvette adapters, cloth for wiping cuvettes, scissors, USB cable, lithium ion rechargeable battery, 115VAC to 15VDC power adapter, USB drive, instruction manual, and instrument quality certificate.

https://manuals.hannainst.com/HI801-01

Holmium Oxide Glass Filter for Spectrophotometers - HI801-11

Supplied with Certificate of Analysis

Get to know us!

Holmium Oxide Glass Filter for Spectrophotometers - HI801-11

Supplied with Certificate of Analysis

Related products

Graduated Pipette (1000 µL) – HI731341

Shockproof Rubber Boot (Blue) – HI710027

Shockproof Rubber Boot (Orange) – HI710034

Shockproof Rubber Boot (Blue) – HI710029

Glass Cuvettes for Turbidity Meters (4 pcs) – HI731331N

Get to know us!